How To Set A Petsafe Collar

Stay & Play®
Wireless Argue
Receiver Collar for
Stubborn Domestic dog

PIF00-13672
Product Manual

Delight READ THIS Unabridged Product MANUAL Before BEGINNING

Welcome
You and your pet were fabricated for each other. Our aim is to aid y'all have the best companionship and the most memorable moments together. Your new PetSafe ® Stay & Play ® Wireless Fence Receiver Collar for Stubborn Dogs is designed to give your pet maximum
freedom while keeping him condom.
We know that safety pets make happy owners. Earlier getting started, delight take a moment to read through the of import safe information. If you accept whatsoever questions, please don't hesitate to contact us.

Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd., and any other affiliate or brand of Radio Systems Corporation may be referred to collectively every bit "We" or "United states."

Important Condom Information

Explanation of Attention Words and Symbols used in this product transmission

This is the safety alert symbol. Information technology is used to alert you lot to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or decease.

WARNING indicates a hazardous state of affairs that, if non avoided, could event in expiry or serious injury.
CAUTION, used with the condom alert symbol, indicates a chancy state of affairs that, if non avoided, could event in minor or moderate injury.
Circumspection, used without the safety alert symbol, indicates a hazardous situation that, if not avoided, could result in harm to your pet.
NOTICE is used to accost prophylactic use practices non related to personal injury.

Not for utilize with aggressive dogs. Do non use this product if your dog is prone to ambitious behavior. Aggressive dogs tin can cause severe injury or death to their owners and others. If you are not sure that this product is right for your domestic dog, please talk to your veterinary or a certified trainer.
The battery should be charged in areas with temperatures ranging from 32°F to 104°F / 0°C to 40°C. Recharging the bombardment exterior of its temperature range tin cause the battery to overheat, explode or catch fire.
This device contains Lithium-Ion (Li-Ion) batteries; never incinerate, puncture, deform, short-circuit, or charge with an inappropriate charger. Fire, explosion, property damage, or bodily impairment may occur if this alarm is not followed.

This product is not a toy. Continue it out of the achieve of children.

This PetSafe® Stay & Play® Wireless Contend for Stubborn Dogs is Not a solid barrier. The organization is designed to human activity every bit a deterrent to remind pets y Static Correction to remain in the boundary established. It is important that you reinforce training with your pet on a regular basis. Since the tolerance level to Static Correction varies from pet to pet, Radio Systems Corporation CANNOT guarantee that the system will, in all cases, proceed a pet within the established boundary. Non all pets can be trained to avoid crossing the boundary! Therefore, if you lot have reason to believe that your pet may pose a danger to others or harm himself if he is not kept from crossing the boundaries, you should NOT rely solely upon the PetSafe® Stay & Play® Wireless Debate for Stubborn Dogs to confine your pet. Radio Systems Corporation shall NOT be liable for any property damage, economic loss, or any consequential damages, sustained as a consequence of whatsoever brute crossing the boundary.

Proper fit of the collar is important. A collar worn for likewise long or fabricated too tight on the pet'due south cervix may cause pare damage, ranging from redness to pressure ulcers. This condition is usually known as bed sores.

Avoid leaving the neckband on the dog for more than 12 hours per day.
When possible reposition the neckband on the pet'southward neck every one to 2 hours.
Check the fit to prevent excessive pressure; follow the instructions in this manual.
Never connect a lead to the electronic collar; it volition cause excessive pressure on the contacts.
When using a carve up collar for a lead, don't put pressure on the electronic collar.
Wash the domestic dog'due south neck area and the contacts of the collar weekly with a damp cloth.
Examine the contact expanse daily for signs of a rash or a sore.
If a rash or sore is constitute, discontinue utilise of the collar until the skin has healed.
If the condition persists across 48 hours, see your veterinarian.
For additional data on bed sores and pressure necrosis, delight visit our website.

These steps will help keep your pet secure and comfortable. Millions of pets are comfy while they wear stainless steel contacts. Some pets are sensitive to contact force per unit area. Y'all may find after some time that your pet is very tolerant of the neckband.
If so, you may relax some of these precautions. It is of import to continue daily checks of the contact area. If redness or sores are plant, discontinue employ until the skin has fully healed.

Y'all may demand to trim the pilus in the area of the Contact Points. Never shave the dog's neck; this may pb to a rash or infection.
Always remove your dog's Receiver Collar before performing any Transmitter testing.
The Receiver Collar should not be on your dog when the system is tested. Your pet may receive an unintended correction.
If you utilise a neckband and ternion for training, be sure the extra collar does not put pressure on the contact points.
Never remove ability from the system when the collar is on the pet. This may activate the Receiver Collar.

Exercise not charge your Receiver Neckband every night.
Charging also frequently can reduce battery life. Charge your Receiver Collar when the Receiver Indicator Light blinks yellow; or when the light blinks blood-red.

How the System Works

The PetSafe® Stay & Play® Wireless Debate for Stubborn Dogs has been proven safe, comfortable, and constructive for pets over five pounds.
The system works by transmitting a radio bespeak upward to 105 feet in all directions. You temporarily ascertain the Pet Surface area with Purlieus Flags for a visual aid in training your pet. Your pet wears a Receiver Neckband with Contact Points that touch his cervix, and, once trained, is allowed
to roam freely in the Pet Surface area. When your pet reaches the Boundary Zone, the Receiver Collar gives a warning tone before delivering a
safe Static Correction through the Contact Points to go his attending until he returns to the Pet Area.

Key Definitions

Receiver Collar: Receives the radio signal from the Transmitter.
Style Button: Turns Receiver on/off and adjusts the level of Static Correction your pet receives outside the Pet Area.

Receiver Indicator Light: Indicates the level of correction at which the Receiver Collar is set. This calorie-free too indicates battery status.
Contact Points: Deliver the safe Static Correction when your pet moves into the Boundary Zone.
Receiver Charger: Charges the batteries inside the Receiver Collar
Receiver Charge Jack: Connection point for charging Receiver bombardment.

Receiver Collar

Step 1. Charge the Receiver Collar

The Receiver Collar Charger is designed to plug into a standard Air-conditioning wall outlet. The Receiver Collar low-cal will glow ruby when the Receiver Charger is properly seated into the Receiver Charge Jack. The lite will plow dark-green when charging is complete. A built-in safety circuit prevents the Receiver Collar from overcharging.
The Receiver Collar volition reach a full charge in 2-iii hours. Each accuse can last up to 3 weeks depending upon the frequency of utilise.

Practice not charge your Receiver Collar every night. Frequent charging tin accept a negative effect on the bombardment. We recommend that the Receiver Collar be used until the Receiver Indicator Calorie-free blinks yellow or ruby-red.

To charge the Receiver Collar, lift and slide the Receiver Collar strap away from the forepart of the unit (1A). Lift the rubber plug to let access to the Receiver Accuse Jack.
The rubber plug needs to remain attached to the Receiver Collar. Plug the Receiver Charger into the Receiver Charge Jack on the Receiver Collar. The Receiver Accuse Jack and Receiver Charger are keyed to fit ane way. Practise not force information technology in backward.

Step 2 Prepare the Receiver Neckband

Your Receiver Collar comes with Short Contact Points. Employ the Long Contact Points for pets with long or thick hair. Tighten the Contact Points using the Contact Point Wrench (2A).
Cheque tightness weekly.

Turning the Receiver Collar ON
Printing and agree the Mode Button continuously for 5 seconds (2B). The Green or Xanthous or Crimson Receiver Indicator Lite will plow ON for v seconds (2C) to indicate battery condition, followed by the Carmine Receiver Indicator Lite flashing the Static Correction Level Settings.

Turning the Receiver Collar OFF
Press and agree the Style Button continuously for 5 seconds. The Reddish Receiver Indicator Calorie-free volition be ON during this time. The Cherry-red Receiver Indicator Light will then turn OFF and all Receiver Indicator Lights will stay OFF indicating that the unit of measurement is turned OFF.
To extend the time between charging the Receiver Collar, consider turning OFF the Receiver Collar when it is not in use.

Receiver Collar Condition Indicators
The Receiver Collar Status Indicator Low-cal along with the Receiver Neckband Alarm Tone is used to determine the battery status and the correction type. Refer to the Receiver Collar Condition Indicator Table below to sympathise the status lights and tones for the Receiver Collar.
During normal operation, the Receiver Collar Indicator Light will wink every 4-5 seconds to indicate the battery status as shown in the table below.

Receiver Collar Status Indicator Tabular array

Status Calorie-free

Alarm Tone

Status

While Plugged into Receiver Charger

Solid red	No tone	Charge in progress
Solid green	No tone	Accuse consummate
No light	No tone	Accuse failure, contact Customer Care Middle

After Removing from Receiver Charger
Continuous green or yellow or reddish (5 seconds elapsing)	No tone	Battery Charge Indication. Occurs immediately later on unplugging the charger from the Receiver Collar
Operating Bombardment Condition
Slow blinking green (every iv-5 seconds)	No tone	Neckband battery charge 100%-60%
Slow blinking yellow (every 4-five seconds)	No tone	Collar battery charge lx%-20%
Slow blinking red (every four-5 seconds)	No tone	Neckband battery accuse xx% or less, charge immediately

Receiver Activation Status
Fast pulsating light-green (iii flashes per 2nd)	Warning tone	Alarm tone
Fast pulsating scarlet (3 flashes per 2d)	Tone for duration of Static Correction	Static Correction beingness delivered up to fifteen seconds
Continuous greenish (10 seconds)	No tone	Over Correction Protection; collar locked for ten seconds

To Set up the Static Correction Level

Read all steps before attempting to set the Static Correction Level.

Press the Style Button and release (2B) when the Receiver Indicator Light illuminates Red (2C).
The Receiver Indicator Light will emit a series of Red flashes representing the Static Correction Level.
Increase the Static Correction Level by pressing and releasing the Mode Button inside 5 seconds of the previous serial of flashes.
The Static Correction levels increase in strength from 1 to half dozen. Pushing the Correction Level Button while the Receiver Collar is on level
6 will cause the Receiver Collar to revert to level 1. Refer to the Function and Response Table to choose the Static Correction level
that best fits your pet.

Function and Response Tabular array
Indicator Light Response	Static Correction Level	Receiver Collar Function
1 Red Wink	1	No Static Correction, Tone But
ii Red Flashes	2	Low Static Correction
3 Reddish Flashes	three	Medium-Low Static Correction
4 Ruby Flashes	4	Medium Static Correction
five Red Flashes	5	Medium-High Static Correction
6 Scarlet Flashes	six	Loftier Static Correction

Over Correction Protection

If your pet enters the Boundary Zone or continues anywhere across the Pet Area, this characteristic limits the Static Correction elapsing to xv seconds. While the arrangement locks out further Static Correction, the green lite will remain on for 10 seconds.
In the unlikely event that your pet leaves the Pet Expanse, he will not receive a Static Correction upon render to the Pet Area.

Pace 3 Fit the Receiver Collar

Important: The proper fit and placement of your Receiver Collar is important for effective training.
The Contact Points must take straight contact with your pet'south pare on the underside of his neck.
See important safety information on pages 5-vii.
To assure a proper fit, please follow these steps:

Brand sure Transmitter is not plugged in, and the receiver is turned off.
Commencement with your pet continuing comfortably (3A).
To make it easier to hear the alert beep, place the Receiver Collar on your pet with the logo side of the Receiver facing your pet's mentum.
Center the Contact Points underneath your pet's neck, touching the pare.
Y'all may demand to trim the hair in the area of the Contact Points. Never shave the canis familiaris's cervix; this may lead to a rash or infection.
Check the tightness of the Receiver Collar by inserting one finger between the terminate of a Contact Point and your pet'southward cervix. The fit should be snug merely not constricting (3B).
Allow your pet to habiliment the neckband for several minutes so recheck the fit. Check the fit again as your pet becomes more comfortable with the Receiver Collar.
Trim the neckband as follows (3C):
a. Mark the desired length of the Receiver Neckband with a pen. Allow for growth if your pet is young or grows a thick wintertime coat.
b. Remove the Receiver Collar from your pet and cutting off the backlog.
c. Earlier placing the Receiver Collar dorsum onto your pet, seal the edge of the cutting neckband by applying a flame along the frayed edge.

To Re-Thread the Collar

The slide buckle prevents the collar from becoming loose around your pet's neck.

The ridges must be facing up; the neckband will slip if it is non properly threaded.

To loosen: Slide the strap through the Slide and Fasten Buckles and pull downward.

To tighten: Slide the strap upward through the Fasten Buckle and pull through the Slide Buckle

Taking Your Pet Out of the Pet Area

Of import: Remove the Receiver Collar and leave it in the Pet Area.
Once your pet learns the Boundary Zone, he volition be reluctant to cross it for walks or auto rides.
Option 1: Replace the Receiver Collar with a regular neckband. Put your pet in a car that is within the Pet Expanse and drive him out of the Pet Expanse.

Option two: Replace the Receiver Neckband with a regular neckband and leash. Walk your pet out of the Pet Surface area while giving a command such as "OK" at a specific place of the Boundary Zone (the cease of your driveway, sidewalk, etc.). Always leave the Pet Area with a leash at this place and your pet volition acquaintance leaving the Pet Surface area merely on a ternion, only at this place, and simply with a person. Y'all may initially need to convince your pet to go out the Pet Surface area with a food treat and lots of praise.
Annotation: Yous may besides behave your pet out of the Pet Expanse.

Troubleshooting
The Receiver Collar is not beeping when setting upward the Purlieus Zone.	Make sure the Receiver Collar is turned on and Battery Status Lights are flashing every 4-5 seconds Charge Receiver Neckband The beep may be difficult to hear in a noisy environment. Use Test Light as explained in the "Examination Calorie-free Instructions" section, and use information technology to determine the location of the Purlieus Zone. Cheque that the Transmitter is set up co-ordinate to directions.
The Receiver Collaris not beeping or administering a Static Correction.	Make certain the Receiver Collar is turned on and Battery Status Lights are flashing every 4-5 seconds Charge Receiver Neckband Check that the Transmitter is plugged into a working 120-volt outlet, the Power Calorie-free is on, and the Transmitter controls are set at your desired settings.
The Receiver Collar is beeping everywhere.	Check that the Transmitter is plugged into a working standard 120-volt outlet, the Power Lite is on, and the Transmitter controls are prepare at your desired settings. Bring Receiver Collar within ten anxiety of the Transmitter to reset. Make sure no continuous warning is sounding on the Transmitter.
The Receiver Collar is beeping inside the business firm.	It is recommended to remove the Receiver Collar from your pet when indoors to avert activation of the Receiver Neckband. Make sure the Transmitter is plugged in and fix up according to the directions. Ensure the entire house is within the Pet Surface area. The Transmitter may need to be moved to adjust the Pet Area to include the unabridged house. If relocating the Transmitter, remove the Receiver Collar from your pet before removing power from the Transmitter.
My pet is receiving a Static Correction in his metal crate.	The Receiver Collar activates when it loses the Transmitter bespeak. The metal crate may block the Transmitter signal which causes the Receiver Collar to activate. Remove the Receiver Collar from your pet when placing him in his metal crate.
The Purlieus Zone seems to fluctuate.	This is normal for the electromagnetic field of the Stay & Play® Wireless Fence for Stubborn Dogs. The field may exist afflicted by surrounding "electronic noise," which can cause it to fluctuate upwards to five%. Where the Receiver Collar activates is influenced past the speed and orientation of the Receiver Collar as your pet enters the Boundary Zone.
The Receiver Collar activates in the heart of the yard.	The Receiver Collar activates when it loses the Transmitter signal. This sometimes occurs if a large metal object is between the Receiver Collar and Transmitter, if the orientation of the Receiver Collar changes nearly the Boundary Zone, or if the surrounding "electronic noise" interferes with the signal. If this continues to occur, consider relocating the Transmitter and resetting the Pet Surface area.
The Receiver Collar is beeping but my pet is not responding to the Static Correction.	Make sure the Static Correction Level is fix at ii or above. Test the Receiver Collar with the Exam Light. If the Test Light flashes, bank check the fit of the Receiver Collar. Trim your pet's fur where the Contact Points touch the neck and/or switch to the longer Contact Points. Contact Points must be in contact with the dog's skin. Increase the Static Correction Level. Repeat preparation steps to reinforce grooming.
My pet reacts strongly to the Static Correction and has get fearful.	Lower the Static Correction Level. Make sure you are in control of the situation when your pet receives his first Static Corrections (accept him on a ternion fastened to a separate, non-metal collar) and pb him into the Pet Area and praise him. If your pet remains fearful, suspend preparation and start again the side by side mean solar day. Make certain to end all grooming sessions on a positive note with lots of praise and play.
I was setting up the Pet Area and after I turned downwards the Boundary Control Dial, the Receiver Collar would no longer beep or right.	You may have turned the Boundary Control Dial downward besides quickly, causing the Receiver Neckband to become into power-neglect manner. This is a safety feature designed to protect your pet when power to the Transmitter goes out. With the Receiver Collar inside 10 feet of the Transmitter, readjust the Boundary Control Dial and reset the Boundary Zone, making sure to turn the dial downward slowly.
My adjacent-door neighbor has an In-Ground Containment Organization and the Receiver dollar does not activate virtually their holding	Your neighbor's In-Footing Debate bespeak may interfere with the performance of the Receiver Neckband preventing activation shut to their fence. To minimize the interference, reduce the size of the Pet Surface area or move the Transmitter away from the In-Ground Argue Arrangement. Conform the Pet Area so that the Receiver Collar activates at least 5 feet beyond the reduced Boundary setting when walking towards the In-Basis Fence.
The Receiver Collar has injured my pet's cervix.	Failing to follow the important safety information at the front end of the Operating Guide has caused pressure level ulcers. Some descriptions of advanced pressure ulcers describe the sores as looking like burns on the dog's neck. Be assured that electronic collars practise not use enough energy to create electrical burns. The energy in an output pulse is only a few thousandths of a Joule; information technology is like in nature to the static pulse that you may feel when getting out of your auto. In some cases, force per unit area ulcers are described as chemic burns. The battery in your Receiver Neckband is sealed, in addition, your collar'southward housing is also sealed. This redundant sealing makes it virtually impossible, without misuse or corruption, for your Receiver Collar battery to leak onto your pet's neck. Please review and follow the important safety information on pages vi-8, and the instructions in Step three nether the heading "Fit the Receiver Collar" on pages 22-25.

Test Light Instructions

Make certain the Receiver Collar Battery is properly charged. Set the Correction Level to 2 or higher up.
Hold the Test Light Contacts to the Contact Points.
Walk toward the Boundary Zone holding the Receiver Collar at your pet's neck level until the Exam Light flashes. Save Test Low-cal for future testing.

Terms of Employ and Limitation of Liability

Terms of Utilise
The apply of this product is subject to your acceptance without modification of the terms, atmospheric condition and notices contained with this product. Use of this production implies acceptance of all such terms, conditions, and notices. If yous do non wish to accept these terms, conditions, and notices, delight render the product, unused, in its original packaging and at your own toll and take chances to the relevant Customer Care location together with proof of buy for a full refund.
Proper Use
Proper Utilise includes, without limitation, reviewing the entire Product Manual and any specific prophylactic information statements. The specific temperament or size/weight of your pet may not exist suitable for this production. If you are unsure whether this product is advisable for your pet, please consult your veterinary or certified trainer prior to use. For products used with pets where preparation is desired, Radio Systems Corporation recommends that these training products are not used if your pet is
aggressive and accepts no liability for determining suitability in
individual cases.
No Unlawful or Prohibited Utilize
This product is designed for use with pets simply. This product is not intended to harm, injure or provoke. Using this product in a way that is not intended could consequence in a violation of Federal, State or local laws.
Limitation of Liability
In no consequence shall Radio Systems Corporation or any of its associated companies exist liable for (i) any direct, indirect, punitive, incidental, special or consequential damage and/or (ii) any loss or damages whatsoever arising out of or connected with the use or misuse of this product. The Purchaser assumes all risks and liability from the use of this product to the fullest extent permissible by law.
Modification of Terms and Atmospheric condition
Radio Systems Corporation reserves the correct to change the terms, atmospheric condition and notices governing this production from time to fourth dimension. If such changes have been notified to yous prior to your use of this production, they shall exist binding on yous every bit if incorporated herein.

Compliance

FCC
This device complies with role 15 of the FCC Rules. Operation is field of study to the post-obit ii conditions: (ane) This device may non cause
harmful interference, and (2) this device must take any interference received, including interference that may cause undesired operation.
Annotation: This equipment has been tested and found to comply with the limits for a Grade B digital device, pursuant to function 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency free energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If interference does occur to radio or goggle box reception, which tin can exist determined past turning the equipment off and on, the user is encouraged to attempt to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from t at to which the receiver is continued.
Contact the Customer Care Center at +1 (800) 732-2677.
CAUTION: Modification or changes to this equipment not expressly approved by Radio Systems Corporation may void the user'southward authorisation to operate the equipment.

Australia
This device complies with the applicative EMC requirements specified by the ACMA (Australian Communications and Media Dominance).

Customer CareInternational

USA & Canada — Tel: 800-732-2677
Monday – Friday 8 AM – 8 PM / Sat 9 AM – 5 PM
Australia — Tel: 1800 786 608
Monday – Friday 8:30 AM – 5 PM
New Zealand — Tel: 0800 543 054
Monday – Friday 10:30 AM – 7 PM

Warranty

This product has the benefit of a limited manufacturer'due south warranty.
Complete details of the warranty applicative to this Product and its terms can be plant at petsafe.com and/or are available by contacting your local Customer Care Middle.

Ezoic

Radio Systems Corporation
10427 PetSafe Way
Knoxville, TN 37932
+1 (800) 732-2677
petsafe.com
YU400-1623/2
©2021 Radio Systems Corporation

Documents / Resources

References

PetSafe® | Dog Fences | Feeders | Collars | Cat Litter Boxes

Source: https://manuals.plus/petsafe/wireless-fence-receiver-collar-for-stubborn-dogs-manual